• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 17 subscribers
  • Views 3508 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [H] Monostable Multivibrators - Top Questions Answered

Albert Xu1
Mastermind 24055 points

Quickly find solutions to common questions about monostable multivibrator (one-shot) devices by clicking this link. This FAQ answers the most common questions asked about these devices ………………

Use Cases & Part
Recommendations

Monostable Multivibrators

Voltage Translators

 Input Parameters Output Parameters
Power and Thermals Timing Parameters Logic Technology Quality and Manufacturing 
 Simulation Models
  1. [FAQ] How does a monostable multivibrator (one shot) work?
  2. [FAQ] Why is there no PSpice model for a Monostable Multivibrator device?
  3. [FAQ] What is the maximum output pulse length for a monostable multivibrator?
  4. [FAQ] How stable is the output pulse length of a monostable multivibrator across changes in supply voltage?
  5. [FAQ] How stable is the output pulse length of a monostable multivibrator across temperature?
  6. [FAQ] How do I configure a monostable multivibrator's inputs for rising/falling edge triggering?
  7. [FAQ] Can I connect the Cext pin to ground on a monostable multivibrator?
  8. [FAQ] How do you determine the output pulse width and the 'K' value for a monostable multivibrator?
  9. [FAQ] How do I terminate an unused channel of a monostable multivibrator (one shot)?