Other Parts Discussed in Thread: SN74AUP1T157, SN74AVC4T245, , TXB0104
Regaridng the High/Low Level Input Voltage on the Recommended Operating Conditions, the value is VCCI/0V respectively.
If the Undershoot is observed and the voltage on the input is negative, can we use the input voltage on the Absolute Maximum Ratings which is -0.5V - 6.5V to judge the undershoot is not an issue for the reliability or long term functionality of the device, or not?
And could the above logic be applied to other TI's logic device which has the input clamp diode?
*For example, SN74AVC4T245, SN74AUP1T157.
Thank you.