Hi all
I will use SN74LV08APW in Vcc@3.3V.
But the input signal attitude is 5V.
In datasheet, VI(input voltage range) is 0 to 5.5V description.
Does it mean the LV08A have 5V tolerant?
best regards.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all
I will use SN74LV08APW in Vcc@3.3V.
But the input signal attitude is 5V.
In datasheet, VI(input voltage range) is 0 to 5.5V description.
Does it mean the LV08A have 5V tolerant?
best regards.
Hi,
Welcome to the forums!
Yes this is correct. This FAQ also covers this topic: e2e.ti.com/.../723607