• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN74AVC2T244: Is this device suitable for a 125 MHz clock, 1.05 V to 3.3 V level translation?

SN74AVC2T244: supply current when VCCA = 3.3V, VCCB =0V

Jason Shen
Intellectual 1945 points
Part Number: SN74AVC2T244

Dears

We have one use case of SN74AVC2T244, VCCA = 3.3V, VCCB =0V, direction from A to B, and OE = 1, in this condition, how about the supply current and leakage current, thanks.

Jun Shen

  • 0
    TI__Guru* 96591 points

    Hi Jun,

    The input leakage current doesn't have any dependence on the output supply voltage, it will still be 1.5 uA max.

    The output leakage is also 1.5 uA in this circumstance.

    The supply current is dependent on the input conditions. If all inputs are held at the rails (0V or Vcca), then IccA can be up to 3uA max.