The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74HC595: The falling edge is longer than 300ns

Part Number: SN74HC595

Hi Team,

My customer now use SN74HC595. And the high voltage level is set as 90ns in QB.

The rising edge is ok. but the failing edge is longer than 300ns.

Could you help to give some advice?