• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD4046B: SCHA002A: Application Report

Mark Philip Felipe
Genius 9705 points
Part Number: CD4046B

Hi Team, we would like to seek clarification about page 16 figure 9a, do we have a much clearer data graph or equation used on the graph? 

Thank you.

-Mark

  • 0
    TI__Guru* 96591 points

    Hey Mark,

    We have limited data on the parts acquired from Harris (anything that starts with CD) - pretty much what you see is what you get.

    As far as data on the graphs go, I typically will use a tool like http://www.graphreader.com/ to get pretty accurate values out of those old graphs. As far as I know, these were done via measurements, not through any equations.

    Is there a particular application that you're trying to setup the CD4046B for?