SN74AC14: Acceptable overshoot/undershoot level in short term

Kazuki Itoh

Part Number: SN74AC14

Hello team,

I've heard that the TI's standard logic devices won't be guaranteed but may works with large VOS/VUS such us VCC+1V for 10ns from logic FAQ.

So, do you think if the OS/US duration is 5ns, the 2V OS/US will be acceptable?

Regards,

Itoh

over 3 years ago

0 Rami Mooti1 over 3 years ago

TI__Mastermind 23393 points

Kazuki,
.
What's the Vcc in your system that you're working with? 2V seems a bit high for an OS/US. With regard to the overshoot/undershoot, see below in the datasheet the first note. These values can be exceeded as long as you observe the max clamp current ratings (+/-20mA)

Thanks,
Rami

0 Rami Mooti1 over 3 years ago in reply to Rami Mooti1

TI__Mastermind 23393 points

Hey Itoh,

Haven't heard from you in a few days. I'm going to go ahead and close this thread but don't hesitate to reach out if you need anything else.

Rami

0 Kazuki Itoh over 3 years ago in reply to Rami Mooti1

TI__Genius 9165 points

Hello Rami-san,

I haven't heard response from my customer.

OK, let's close this thread.

Thank you so much.

Regards,

Itoh

Logic

Logic forum

SN74AC14: Acceptable overshoot/undershoot level in short term