SN74AHCT1G04: SN74AHCT1G04

betul yildiz

Part Number: SN74AHCT1G04

Hello, I am trying to simulate the behaviour on PSpice. I am providing 0-3.3V pulse input but it does not invert properly. It always gives a high input. Could you please help me with this issue? According to data sheet it should work within this range.

over 3 years ago

0 Emrys Maier over 3 years ago

TI__Guru* 96862 points

Hello,

It looks like there's an issue with the SN74AHCT1G04 model. I'll ask my modelling expert to take a look into this and get back to you.

0 Chad Crosby over 3 years ago

TI__Expert 6680 points

Hi,

I've regenerated this model, and tested that it works. I'll work on getting these changes updated to the web. Please see the attached for the updated model:

SN74AHCT1G04.zip

Thanks!

Chad Crosby

0 betul yildiz over 3 years ago in reply to Chad Crosby

Prodigy 20 points

Hello,

I still see no difference! I mean it is working differently now but does not invert my input. Please see the pictures below. I have looked at the datasheet and my input is within the range and it should invert it. And, Why it is given 1V output now? Could you please help me with this? I am missing something?

Bests

Betul

Logic

Logic forum

SN74AHCT1G04: SN74AHCT1G04