Team,
For the device, my question is showing as below.
1. If there is unused ch, what is the suggested connection? GND/Vcc/floating?
2. Do I need to set default value on input side?
Roy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Team,
For the device, my question is showing as below.
1. If there is unused ch, what is the suggested connection? GND/Vcc/floating?
2. Do I need to set default value on input side?
Roy
Connect inputs to either VCC or GND. Outputs can be left open. See [FAQ] How do I terminate any unused channels of a logic device?
If you want a default value that you can override, use a pull-up or pull-down resistor.