The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD40109B-Q1: unused pin

Part Number: CD40109B-Q1


For the device, my question is showing as below.

1. If there is unused ch, what is the suggested connection? GND/Vcc/floating?

2. Do I need to set default value on input side?