This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

SN74HC125: IBIS model for SN74HC125D ?

Prodigy 20 points

Replies: 2

Views: 328

Part Number: SN74HC125

I tried ti simulate a PCB design with CI buy I could not find the IBIS model and it is not available in TI web.....any ideas?

  • Hello Manuel,

    Since IBIS models only simulate the expected drive capabilities of a device, I would recommend using the SN74HC244 ibis model instead. These two devices are built from the same technology and have identical output characteristics.

    schm004_SN74HC244.ibs


    Looking for a low voltage translator? Check out the AXC family that supports 0.7V to 3.3V translation!

    The Logic Minute training page has videos on many interesting topics that all are kept shorter than 5 minutes.

  • In reply to Emrys Maier:

    Hi,

    Thanks for your proposal with the SN74HC244. I will simulate with it for a early estimation.

    regards!

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.