This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] What does 'partial power down' or 'Ioff' mean in the datasheet?

Guru 56010 points

Replies: 0

Views: 1560

Click here for our parent FAQ

The "Ioff" specification in the electrical characteristics table is only in the datasheet of devices that have the special feature of "partial power down" - also known as "back-drive protection."

Partial power down protection is the lowest level of live-insertion isolation, as defined by the application report "Logic in Live-Insertion Applications."

Partial power down essentially states that, if the supply of a device is held at 0V (any supply for multi-supply devices), then the input and output pins of said device will enter a high impedance state. The maximum leakage current in this high-impedance state is defined by the Ioff specification in the datasheet.

Looking for a low voltage translator? Check out the AXC family that supports 0.7V to 3.3V translation!

The Logic Minute training page has videos on many interesting topics that all are kept shorter than 5 minutes.