This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: SN74AHCT573
Could you please help on these 2 questions?
The application of SN74AHCT573 or SN74AC573 will be latches, FYI
1. What is the different of SN74AHCT573 and SN74AC573? I just found the working temperature is different, is there any more different for these two?
2. Are Unused inputs connected direct to GND or pull-down resistor to GND? what's the pull down resistor value are you suggest?
They are apart of different families so they will have varying specs, but both perform the same function. Please watch the training video below for more details on this.
You can connect the unused inputs directly to ground.
Check out our new AXC family of Voltage Translators!
Watch the Introduction to AXC Family to find out more about the family.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
The primary difference between these devices is the logic family. One is in the "AHCT" family, while the other is in the "AC" logic family. The 573 function is functionally identical in both families.
You can find detailed information regarding the logic families in the Logic Guide. Here's some excerpts to help:
These graphics show the input voltage requirements (VIH, VIL) and output voltage capabilities (VOH, VOL) of 5-V TTL and CMOS devices. The AHCT family is a TTL compatible CMOS family, so it adheres to the standard on the left, and the AC family adheres to the standard on the right.
Additionally, there are full descriptions for each family that show some of the differences. Most notably, the AC family supports 24mA of output current, while the AHCT family only goes up to 8mA.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.