This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: SN74AXC8T245-Q1
I'm looking at the SN74AXC8T245-Q1, however the datasheet doesn't seem to indicate rise time for the output drivers for this part. I see the enable and disable times, but could TI advise the minimum Rise and Fall time for output signals while the IC is enabled?
The rise and fall time will depend on the load. You can use the FAQ below to help calculate the rise and fall time for your load:
Check out our new AXC family of Voltage Translators!
Watch the Introduction to AXC Family to find out more about the family.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.