Hi team.
I'd like to know why my customer's phenomenon happen.
Bellow is the phenomenon, sometimes no output.
Ch1 : 1A1
Ch2 : 1Y1
Input : 3.3V/10MHz
Please let me know if you need information to solve it.
Sincerely.
Kengo.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team.
I'd like to know why my customer's phenomenon happen.
Bellow is the phenomenon, sometimes no output.
Ch1 : 1A1
Ch2 : 1Y1
Input : 3.3V/10MHz
Please let me know if you need information to solve it.
Sincerely.
Kengo.
Hi Kengo,
I am going to need to know a bit more information on the customer circuit.
Can you provide me with a schematic that shows all the elements on the input and output of the device?
What is the Enable pin of the device connected to?
Is there anything else that is switching when the output stops running?
Thanks!
-Karan
Hi Kengo,
You can go ahead and email me.
My email is k-kotadia @ ti.com
Thanks!
-Karan