Hi,
If I connect VCC=1.8 and pull up resistor of input connected to Vi = 5V means will this device work?
Thanks,
Vignesh.M
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
If I connect VCC=1.8 and pull up resistor of input connected to Vi = 5V means will this device work?
Thanks,
Vignesh.M
Yes, the VI specifications allow input voltages above VCC. See [FAQ] Can the input voltage (Vi) to my logic device be higher than the supply voltage (Vcc)?