Hi team,
I'd like to confirm the customer use case is okay or not.
Could you please check the questions below?
1: Is it okay to add a reset circuit connecting OE?
2: Is it okay to connect OE to Vcca directly?
Best Regards,
Kazuki Kitajima
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
I'd like to confirm the customer use case is okay or not.
Could you please check the questions below?
1: Is it okay to add a reset circuit connecting OE?
2: Is it okay to connect OE to Vcca directly?
Best Regards,
Kazuki Kitajima
Hey Kazuki,
I'd like to add to Clemens' first answer assuming you are talking about an RC delay: Technically, the answer is yes as long as you don't violate the input transition rate spec, but this will likely be impossible if you directly connect the RC. You will need an additional schmitt-trigger buffer to handle the slow transition.
Hi Dylan-san, Clemens-san,
Thank you for your reply.
Understood.
Best Regards,
Kazuki Kitajima