how to use PAN1315

hamza essid

Other Parts Discussed in Thread: MSP430BT5190

Hello

in my project I want to replace the USB connection by the Bluetooth module PAN1315 in the card electrocardiogram using the micro-controller Pic18f2550.My problem is that I don’t know how to connect the Bluetooth module and the Pic18f2550.also I want to know the difference between the PAN1315 and the PAN1315ETU because I don’t know what I should use in my project the PAN1315 or the PAN1315ETU.

Thank you

over 13 years ago

0 Arild Kolsrud over 13 years ago

TI__Intellectual 1340 points

Harmza:

The difference between the PAN1315 and the PAN1315ETU is that the PAN1315 is the Panasonic Bluetooth module whereas the PAN1315ETU is the Easy-To-Use evaluation board made to mate with the MSP430BT5190 hardware development platform.

In order to connect the PAN1315 module (or PAN1315ETU board) to a microcontroller you will need 4-wire UART (H4) plus reset pin and slow clock (32.768 kHz).

Arild

0 hamza essid over 13 years ago in reply to Arild Kolsrud

Prodigy 70 points

thank you Arild

So i understand that if i want to connect my Bluetooth module with the Pic18f2550 i should use the PAN1315 not the PAN1315ETU.

Also i want to know if you can give me a schematic exemple of the connection between the PAN1315 and the microcontroller Pic18f2550 because i dont have any schematic to start.preferably on ISIS not Eagle if you can.

thank you

0 hamza essid over 13 years ago in reply to hamza essid

Prodigy 70 points

Hello Arild

I m waiting ...

Thank you

0 Arild Kolsrud over 13 years ago in reply to hamza essid

TI__Intellectual 1340 points

Hi Hamza:

The following link will explain to connect the PAN1315ETU: http://www.panasonic.com/industrial/includes/pdf/PAN1315ETU_design-guide.pdf

Arild

Bluetooth®︎

Bluetooth forum

how to use PAN1315