Hello,
My customer uses our EK-TM4C1294XL EVM for a demonstrator. They ask if we could generate a 3D CAD file so they could check the fit with their mechanics. Please let me know. Thank you.
Best regards,
François.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer uses our EK-TM4C1294XL EVM for a demonstrator. They ask if we could generate a 3D CAD file so they could check the fit with their mechanics. Please let me know. Thank you.
Best regards,
François.
Hello Francois,
We don't have such a file to offer and do not have the know-how on how to generate such a file.
Also, I am not clear what the customer means by 'for a demonstrator', is that just a one-off demonstration? I ask because the EK-TM4C1294XL, like all TI EVMs, is not permitted to be used for mass production. Please make sure the customer is clear on that.
Best Regards,
Ralph
Hi Ralph,
Thank you for the quick response. This is indeed for a one-off demo. I will close this case.
Best regards,
François.