Hi E2E,
Please suggest a suitable 20-pin mating connector for TMDSEMU200-U. Thank you.
Regards,
Carlo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi E2E,
Please suggest a suitable 20-pin mating connector for TMDSEMU200-U. Thank you.
Regards,
Carlo
We will het back to you soon on this.
Shamim
Carlo,
The native header on the XDS200 is a CTI20 female connector. The XDS200 also ships with the following: CTI20-TI14(TI 14 pin JTAG), CTI20-ARM20(ARM 20 pin JTAG C20) , CTI20-ARM10(ARM 10 pin JTAG C10). If you wanted to design a board header that is native to the CTI20 connector alone, that is possible. Traditionally most TI DSP/non ARM MCU use the 14-pin connector.
If you need to purchase one of the above as a replacement, the only vendor I am aware of is Blackhawk: https://www.blackhawk-dsp.com/products/adapters-and-pin-converters/pin-converters#14_PIN
Best,
Matthew