TMDSHSECDOCK: Header pins on baseboard docking station do not output signal/data

Sinan KAMILCELEBI

Part Number: TMDSHSECDOCK
Other Parts Discussed in Thread: TMDSECATCNCD379D, TMDSCNCD28379D, C2000WARE

Hi,

I am using TMDSECATCNCD379D development kit in my project. I also use TMDSHSECDOCK to access the GPIOs on this kit. But I can't get a signal or data from the header pins on TMDSHSECDOCK. Should I make any setting in TMDSECATCNCD379D or TMDSHSECDOCK?

Sinan,

Best regards.

over 2 years ago

+1 Kevin Allen18 over 2 years ago

TI__Mastermind 38295 points

Hi Sinan,

What signals from the TMDSCNCD28379D are you trying to access? Please review the 'TMDSCNCD28377D_180cCARD_pinout_R1_3.pdf' in the C2000WARE project directory below for details on HSEC baseboard signal mapping:

C:\ti\c2000\C2000Ware_3_04_00_00\boards\controlCARDs\TMDSCNCD28379D\R1_3

Best,

Kevin

+1 Sinan KAMILCELEBI over 2 years ago in reply to Kevin Allen18

Intellectual 520 points

Hi, Kevin:

Thank you very much for your feedbacks.

My problem is solved.

Sinan,

Best regards,
Good days.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSHSECDOCK: Header pins on baseboard docking station do not output signal/data