• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 101 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RM44L520: Is there and C source code example for writing data into OTP region while runtime . Not in DEBUG Build Mode but in Release Build Mode .

BarematalProgrammer
Expert 1715 points
Part Number: RM44L520

Hello , 

Is there and C source code example for writing data into OTP region while runtime . Not in DEBUG Build Mode but in Release Build Mode . 

Thanks and warm regards 

  • 0
    TI__Guru**** 186196 points

    Hi Chandre,

    No, I don't have C source code to programming OTP during runtime. You can write data to customer OTP using F021 flash APIs.

    If you write to the customer OTP, make sure you do not unintentionally write to the AJSM locations (0xF0000000-0xF000000F) or you will lock the part.