This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP432E411Y-BGAEVM: Connecting to a PC

Part Number: MSP432E411Y-BGAEVM

Hi everyone,

sorry if this is a stupid question, I'm a beginner and there may be something trivial that I'm completely missing here, but anyway, here goes.

I just got an MSP432E411Y-BGAEVM and I have trouble getting it up and running. I have some experience with TM4C and all I had to do to start developing was to plug in the USB cable and set up the software. However, when I plug in the USB cable from my PC to the MSP432 nothing happens. It's not detected by the PC and doesn't do anything. As if it wasn't even powered on. I looked at the user manual and the datasheet but failed to find anything that would help me.

Here's a picture if it helps: