sorry if this is a stupid question, I'm a beginner and there may be something trivial that I'm completely missing here, but anyway, here goes.
I just got an MSP432E411Y-BGAEVM and I have trouble getting it up and running. I have some experience with TM4C and all I had to do to start developing was to plug in the USB cable and set up the software. However, when I plug in the USB cable from my PC to the MSP432 nothing happens. It's not detected by the PC and doesn't do anything. As if it wasn't even powered on. I looked at the user manual and the datasheet but failed to find anything that would help me.
Here's a picture if it helps: https://imgur.com/a/fDTZU1z