This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LC4357: pin mux configuration for RMII

Part Number: TMS570LC4357

What pinmux registers are required for RMII configuration? I want to use the following pins 


P1 - RXD0

A14 - RXD1

K19 - Ref Clk

H19 - TX_EN
J19 -  TXD1

J18 - TXD0

We tried as per pinmux defined in Table 32-4. However it does not work. There is separate table in 6-2 which is for input pins definition. Do we need that too? 

What is the right pin mux configuration for RMII?