This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-EXP432E401Y: [MSP-EXP432E401Y] "Lock Device" in UniFlash

Part Number: MSP-EXP432E401Y
Other Parts Discussed in Thread: UNIFLASH

Hi,

I am using UniFlash ver 7.1.0.3796 to test bootloader with MSP-EXP432E401R LaunchPad.

For the testing purpose, I accidently hit "Lock Device" button in "Settings & Utilities" pane.

After that, my LaunchPad does not work at all:

 Press "Erase Entire Flash" button, I got error message saying "Flash Programmer: Mass erase failed".

Of course, when I start debugging any CCS project in CCS 10.4, I got "Memory write failed: Flash Programmer: Mass erase failed" and "Load failed" errors.

I did not get customized my LaunchPad, as it is when purchased.

Would you kindly advise me how to unlock this device or back to factory initial configuration ?

Any tips/advises are appreciated in advance.

HaeSeung