Follow the process above , can not be used normally, please help confirm what the problem is
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Follow the process above , can not be used normally, please help confirm what the problem is
Hello,
I assume the xds2xx_conf get xds2xxu 0 command fails to open a port also? Assuming this is the case, and given that none of the LEDs light up and Windows device manager does not detect the probe, it looks like the probe is defective. I would recommend contacting the vendor for a return or contacting Blackhawk (the probe looks like a Blackhawk USB200) for further support: https://www.blackhawk-dsp.com/support
Thanks
ki