Other Parts Discussed in Thread: AM2431
Hi Team,
My customer had this question regarding power sequencing.
- Figure 7.3 Power-Up Sequencing on AM2431 datasheet says, VMON_VSYS needs to be High before power-up sequence, but it seems that there is no description on that in 5.2.1 Power Management Subsystems, 5.3 Reset on AM64x/AM243s TRM.
Chap 5.2.2.1.1 Power OK(POK) Modules in TRM says,
In this family of devices, the Power-on-reset module is used only for voltage monitoring.
From the description I think that VMON_VSYS has no effect on reset function. is that correct?
and how about VMON_1P8_MCU, VMON_1P8_SOC,VMON_3P3_MCU and VMON_3P3_SOC?
Best regards,
Mari Tsunoda
