This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[AM3715]: 'flash_erase' or 'mtd_debug' can not erase nand flash => always show 'bad block'

Other Parts Discussed in Thread: AM3715

Hi Sir,

When I use no matter 'mtd_debug erase /dev/mtd4 0 0x20000' or 'flash_erase /dev/mtd4 0 0x20000' to erase nand flash, it reports "nand_erase_nand: attempt to erase a bad block at page 0x000xxxxxx" for each of the block in all the region "/dev/mtd4 0 0x20000".
There is no block is erased (all skipped)!
However, under uBoot command line, I can erase the nand blocks beginning from offset position of mtd4 without any problem.
A hint I digged out is when the kernel's mtd module try to read nand oob bytes for a block, the indicated callback function tells that the oob bytes is 0x30,0x30,0x30...
That's why the "nand_erase_nand: attempt to erase a bad block at page 0x000xxxxxx" happened.

Our module is AM3715.
The SDK as below:

Please help correct me if any thing missed.

Many thanks!