Other Parts Discussed in Thread: EK-TM4C129EXL
Hello,
I have a custom board with the TM4C1290NCZAD and I am starting debugging the hardware.
At the moment I am able to download code and debug it.
There aren't examples for the TM4C1290NCAZD and I tried to modify the uartecho example for the EK-TM4C129EXL that I have.
I am using the TI-RTOS for this simple example
The example works perfectly on the launchpad but I got a bus error on my board when I call a uart_write or uart_read, clearly I initialized the UART.
I have other porting problems to:
- how can I change the platform?
- I am using a 16 MHz quartz while the EK-TM4C129EXL uses a 25 MHz. How can I change the quartz setting?
I hope you can help me
Errico