TIDM-SOLAR-DCDC: Where is the ccs project files and design guide

Damith Pavithra

Part Number: TIDM-SOLAR-DCDC
Other Parts Discussed in Thread: CONTROLSUITE, C2000WARE

Hello

i want to know where is the CCS project of the following development kit. TIDM-SOLAR-DCDC reference design | TI.com
. This page doesnt have the project or design guide.
There is a similar named project in the old control suite but several C files are missing including the MPPT code files. Why is that.

regads

over 1 year ago

0 Chen Jiang ti over 1 year ago

TI__Genius 15555 points

Hi Damith,

I see the same issue on my side. I need to check internally and will get back to you by the end of this week if possible.

Regards,

Chen

0 Chen Jiang ti over 1 year ago

TI__Genius 15555 points

Hi Damith,

You can find the doc as below.

C:\ti\controlSUITE\development_kits\HV_SOLAR_DC_DC\Docs

Regards,

Chen

0 Damith Pavithra over 1 year ago in reply to Chen Jiang ti

Expert 1125 points

Dear Chen

My real problem is this.
There are two header files called

mppt_incc.h
mppt_pno.h

I was unable to find those files in the project folder you mentioned. Therefore i searched for the online documentation hoping i would find the files there.
But there was no luck.
Can you please check the above folder and see that those two files are missing.
Please give me a source for those files.

Regards
Damith

+1 Chester Gillon over 1 year ago in reply to Damith Pavithra

Guru 92251 points

Damith Pavithra said:
There are two header files called

mppt_incc.h
mppt_pno.h

I was unable to find those files in the project folder you mentioned

Looking at a controlSUITE installation can see those files in the following directories:

controlSUITE/libs/app_libs/solar/v1.0/IQ/
controlSUITE/libs/app_libs/solar/v1.0/float/
controlSUITE/libs/app_libs/solar/v1.1/IQ/
controlSUITE/libs/app_libs/solar/v1.1/float/

0 Damith Pavithra over 1 year ago in reply to Chester Gillon

Expert 1125 points

Chester

Can i know why the TI decided to remove the solar library from the c2000ware. Why there is no support for the solar applications.

Regards

0 Chen Jiang ti over 1 year ago in reply to Damith Pavithra

TI__Genius 15555 points

Hi Damith,

I think it is due to we later on have TMU support to speed up the execution of some functions. And we pulled some functions like SPLL/DCL out from solar library and make it independent.

Regards,

Chen

Arm-based microcontrollers

Arm-based microcontrollers forum

TIDM-SOLAR-DCDC: Where is the ccs project files and design guide