• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 29 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RM46L852: HALCoGen rendering issue

Bill Bracken
Prodigy 20 points
Part Number: RM46L852
Other Parts Discussed in Thread: HALCOGEN

HalCoGen version 04.07.01 does not correctly render complex tabs.  On the ESM Channel 0-31 for example:

  • channel text does not linux with the corresponding enable/disable 
  • there appear to be additional enable/disable components underneath the correct ones
  • enable/disable components are rendered on top of LT_Counter

Have tried on both linux and windows.

bb

  • 0
    TI__Guru**** 186196 points

    Hi bb,

    Please change the font size to 100% in windows settings:

  • 0 in reply to QJ Wang
    Prodigy 20 points

    This corrected the display issue under windows.  However on a 4k monitor it is almost impossible to read.  Additionally HalCoGen isn't used on Windows.  The client has a linux VM where all the development is done including HalCoGen.  Ubuntu has a 100% or 200% scaling option.  It is set for 100%.  The rendering issue still exists under Ubuntu which is where I'd really like it to render properly.  Have had IT look at the settings and they appear fine.

    Also,  both VMs are run on a Mac using VMWare Fusion.

    Thanks,

    bb

  • 0 in reply to Bill Bracken
    TI__Guru**** 186196 points

    Hi bb,

    The HALCoGen was developed under windows, so we don't linux version and MAC version HALCoGen.

    You may try to run HALCOGen under Linux with WINE.