This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2434: issue in jtag debug on a flashed board using QSPI flash

Part Number: AM2434

Hi Everybody , 

I got my boards  and  flashed  QSPI   memory   , working fine  OK .

now  I woudl like to connect  w XDS110 emulator  but here I have issues :  I am not able to connect and getting emulator reset etc 

please where am I wrong ?   what shoudl I check  to connect to a  device   working on QSPI flash ?

thank you