• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 86 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C123GH6ZRB: TM4E123G Task_sleep not working after adjusting project from TM4C1237

James Dluhy
Intellectual 320 points

Part Number: TM4C123GH6ZRB

We have a product that we are trying to bring new firmware onto. A minimal test product was converted over from a TM4C1237 and now Task_sleep blocks. Worked fine before adjusting the project. Project does use TI-RTOS and driverlb. 

  • 0
    TI__Guru*** 128235 points

    Hello James,

    I would look into pin out and clock configuration but really there isn't much detail here for me to run with. Also I am not deeply familiar with TI-RTOS so I am not sure if there is a change in Sys/BIOS that would impact this - I haven't heard of that happening before and what I know of the Sys/BIOS, I can't think of a feature that would change like that based on the silicon so it's probably a hardware level device configuration aspect that is causing something. Maybe another check is to make sure all the other code is running and Task_sleep isn't blocking because there was a hardware fault?

    Best Regards,

    Ralph Jacobi