MSP432E401Y: MCU direct data transmission and reception through ethernet interface

naga narasimha

Part Number: MSP432E401Y

Dear TI,

I want to send and receive data from ethernet interface with out using LWIP stack. There is any way to receive and send data to ethernet interface directly. The purpose is to reduce the executable file size.

Regards,

Naga Narasimha Rao

over 1 year ago

0 Jace H over 1 year ago

TI__Guru 56685 points

Hello Naga,

For some simple Ethernet examples, check out the Network Services example folder in the SDK:

https://dev.ti.com/tirex/explore/node?node=AN.dnAilBAFI7x.dHhLARA__J4.hfJy__LATEST

0 naga narasimha over 1 year ago in reply to Jace H

Prodigy 170 points

My issue is not resolved and other than network stack examples. there is any way use lower layer for data transmission.

0 Jace H over 1 year ago in reply to naga narasimha

TI__Guru 56685 points

Hello Naga,

TI only provides the aforementioned examples, as well as the examples under the IwIP example folders. Any kind of custom stack beyond these examples is out of scope of what we can support.

You need some sort of network stack to work with Ethernet as that is part of the Ethernet definition and subsequent layers.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSP432E401Y: MCU direct data transmission and reception through ethernet interface