I have a question.
I am using the TM4C129ENCZAD to flash the XDS firmware,
but I read the datasheet and found connection examples for 14-pin and 20-pin, but which one should I use to flash the XDS firmware?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have a question.
I am using the TM4C129ENCZAD to flash the XDS firmware,
but I read the datasheet and found connection examples for 14-pin and 20-pin, but which one should I use to flash the XDS firmware?
Hi,
You can use either one. 14pin use a smaller form factor connector than the 20-pin on your board. Various adapters are provided if you purchase TMDSEMU110-U. See below.