• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 95 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP-EXP432E401Y: Firmware download error

MSP-EXP432E401Y: looking for firmware file MSP432fw.out

Christine Chen
Prodigy 10 points
Part Number: MSP-EXP432E401Y
Other Parts Discussed in Thread: UNIFLASH, LM36010EVM

Where do you get the file MSP432fw.out? I've looked everywhere in my install folders and could not find it. Googling online or on the TI website doesn't return any good results either. I've been trying to update firmware to the MSP-EXP432E401Y via the Scalable PMICs GUI on both online browser and windows software version. It will try to update to version 1.0.3.6, but then get's stuck on "Putting device into BSL mode" so I'm trying to go the route of this forum post MSP-EXP432E401Y: Firmware download error [TI Forum] by using Uniflash to manually do it myself. However, I am unable to find the file MSP432fw.out that the solution references.

Could you please send me the file MSP432fw.out?

  • 0
    TI__Guru**** 158885 points

    Hi,

      I don't know what msp432fw.out does. Perhaps it is the firmware to be loaded on MSP432E LaunchPad to control the LM36010EVM. Why do you need this file? Looks like the file might have come from the LM36010EVM installation in the post you refer to.

     Please refer to LM36010EVM user's guide for detail on the installation of software. https://www.ti.com/lit/pdf/snvu574

    I will also suggest you open a new thread specifying LM36010EVM as the part number so the experts for that device will be able to assist you better for any software or hardware questions related to LM36010EVM.