TMDSCNCD263: Pin mapping between TMDSCNCD263 and TIDM-02009 for running a traction inverter & DC/DC converter

Rahul Gaikwad

Part Number: TMDSCNCD263
Other Parts Discussed in Thread: AM2634, TIDM-02009,

I am using TMDSCNCD263 board with AM2634 micro controller & TIDM-02009 power electronics board for running a motor & DC/DC converter. Can I get pin mapping between TMDSCNCD263 board 180 pins & TIDM-02009 power electronics board?

over 1 year ago

0 Sri Vidya Gunturi over 1 year ago

TI__Expert 7580 points

Hi Rahul

You can get the pin out for Am263 in the data sheet. - https://www.ti.com/lit/ds/symlink/am2634.pdf?ts=1676548970263&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FAM2634

For the Control Card to Hsec Pin Out you can get it from Control Card User guide -

https://www.ti.com/lit/ug/spruj09c/spruj09c.pdf?ts=1676549007845&ref_url=https%253A%252F%252Fwww.google.com%252F

TIDM-02009 power electronics board -Is this for the traction inverter?

Regards

Sri Vidya

0 Sri Vidya Gunturi over 1 year ago in reply to Sri Vidya Gunturi

TI__Expert 7580 points

Traction Inverter User Guide for AM263 - https://dev.ti.com/tirex/explore/node?node=A__AD2nw6Uu4txAz2eqZdShBg__AM263x-Traction-Inverter-Demo__TgMm0pe__LATEST

I found the below pinout from the traction user guide for C2000

C2000 guide - https://www.ti.com/lit/ug/tiduey6/tiduey6.pdf?ts=1676549241377

Regards

Sri Vidya

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSCNCD263: Pin mapping between TMDSCNCD263 and TIDM-02009 for running a traction inverter & DC/DC converter