Other Parts Discussed in Thread: MSPM0G3507,
Hi,
The TRM shows that only TIMG[8...11] do support QEI. Is this also valid for the 2-signal QEI mode (without IDX), or is this mode still available on the other timers?
Thanks,
Robert
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The TRM shows that only TIMG[8...11] do support QEI. Is this also valid for the 2-signal QEI mode (without IDX), or is this mode still available on the other timers?
Thanks,
Robert
HI Robert,
This applies for both 2- and 3- signal QEI modes. So TIMG10 would be the only one on the MSPM0G3507 launchpad that supports QEI mode.
On the MSPM0L1306 none of these timer instances are present.
Best Regards,
Brandon Fisher