• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 29 subscribers
  • Views 180 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-MSPM0G3507: .syscfg files don't work with MSPM0G but they do with MSPM0L

Tim Simerly
Genius 9755 points
Part Number: LP-MSPM0G3507
Other Parts Discussed in Thread: MSPM0G3507, MSPM0L1306, SYSCONFIG

Dear Support:

I am using my MSPM0L1306 LP and importing examples from SDK v0.57 and viewing .syscfg files with no issues.  However when I try to do the same from the same SDK and importing for my MSPM0G3507 LP, I cannot view the .syscfg file.  Instead I get this from doing so using CCS:

I have tried CCS v11.2 and CCS v12.1 and SysConfig v1.15.0 and v1.16.1 and SDK v0.57 and v0.58 and still same issue.  Can you explain what is going on here and what I am missing in order to view .syscfg files in my MSPM0G CCS projects, but yet no problem in my MSPM0L CCS projects while importing examples from the same SDK?

Thanks,
Tim

  • 0
    TI__Mastermind 27505 points

    Hi,

    Could you try if you can build the project successfully?

    Best regards,

    Cash Hao

  • 0 in reply to Cash Hao11
    TI__Genius 9755 points

    Hey Cash:

    Yes, no problem building and running the CCS projects.  I just can't open the .syscfg file with the SysConfig editor.  No problem opening the .syscfg file with the Text editor though, just can't use the SysConfig editor GUI.  Happens to everyone of the CCS projects that I try to open - (i.e, I2C, PWM, GPIO, etc).  However no such problem with the same CCS projects using the MSPM0L LP.  Please advise as to what may be the problem.

    Thanks,
    Tim

  • 0 in reply to Tim Simerly
    TI__Mastermind 27505 points

    Hi,

    What is your sysconfig version? Do you download the sysconfig installation pack on the TI website or you get it from the My secure resources for MSPM0?

    Is your sysconfig installation pack like this one sysconfig-1.15.0_2729-setup.exe

    Best regards,

    Cash Hao

  • +1 in reply to Cash Hao11
    TI__Genius 9755 points

    Hey Cash:

    Good point and thanks for the reminder.  When I installed v0.57 of the SDK, I already had v1.15.0 previously installed so that's what I used which I had downloaded from the TI website. Interesting that it worked with MSPM0L and not MSPM0G.  But uninstalled it and installed the one from MySecure Resources and that fixed the problem - thanks!

    Tim