This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MCU-PLUS-SDK-AM243X: Accessing EEPROM with M4 on Eval board AM243x

Part Number: MCU-PLUS-SDK-AM243X


I am trying to run a small code to write and read to the eeprom in the AM243x eval board from the M4, but whenever I try either access, I get a -4 coming from the I2C module (I2C_INT_NO_ACK).

I have checked that the configuration is correct against the R5 HSR PRP Demo, and the one thing I have noticed is different is the following:

I am wondering if I would need to change this or something else to enable the access to the EEPROM from the M4


Adan Flores