This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MCU-PLUS-SDK-AM243X: Flashing of default_sbl_null.cfg fails on AM243X-LP with MCU+ SDK 09.00.00

Part Number: MCU-PLUS-SDK-AM243X
Other Parts Discussed in Thread: UNIFLASH

Hello community,

I tried to flash default_sbl_null.cfg on my AM243X-LP with included in the latest MCU+ SDK 09.00.00 release as described in Flash SOC Initialization Binary, but it always failed at step 2 of the config file. I retried the same steps with the MCU+ SDK release and it worked just fine. After some investigation I found out, that different images will be flashed in both releases:

09.00.00: sbl_null.release.hs_fs.tiimage : sbl_null.release.tiimage (missing in 09.00.00).

Did I miss something here or is the wrong image used in 09.00.00?

Best regards

Philipp FInke