This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Part Number: TMDSCNCD263

The issue is related to E2 version AM263x Control Card.

I am using this CC to validate one TIDM design. I am giving +5V supply to the design and seeing LD16 LED on the CC board is glowing red. This causing JTAG failure. I am using the released CCXML file only.

I changed the CC and used I new one. This time connection check was successful but just after starting the code execution following debug assert failure message came:-

How to resolve the issue?