This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MCU-PLUS-SDK-AM243X: Upgraded to MCU+ 9.00.00.35 - load_dsmc_hsfs.js times out

Part Number: MCU-PLUS-SDK-AM243X

Hi,

Just upgraded from 8.6 to 9.00, and I noticed load_dsmc.js no longer exists and has been replaced by load_dmsc_hsfs.js. The process to run it appears to be the same as before, though according to the Setup Guide. I've updated my MCU+ system environment variable, I run loadJSFile "C:\ti\mcu_plus_sdk_am243x_09_00_00_35\tools\ccs_load\am243x\load_dmsc_hsfs.js" in the Scripting Console, and it starts fine.

I get to here:

js:> loadJSFile "C:\ti\mcu_plus_sdk_am243x_09_00_00_35\tools\ccs_load\am243x\load_dmsc_hsfs.js"
Connecting to MCU Cortex_R5_0!
Writing While(1) for R5F
Running the board configuration initialization from R5!

I get this line in the Console: MAIN_Cortex_R5_0_0: GEL Output: CPU reset (soft reset) has been issued through GEL.

sciclient_ccs_init_release.out is said to be running on R50_0 in Debug. But I get no CIO, or any other, activity at all. Eventually the Scripting console times out:

com.ti.debug.engine.scripting.Target.run(): Timed out after 200000ms (C:\ti\mcu_plus_sdk_am243x_09_00_00_35\tools\ccs_load\am243x\load_dmsc_hsfs.js#120)

Any ideas?

  • Hi Tron,

    Start from the MCU+ SDK 09.00.00, the AM243x GP device support will be discontinued. It will only support the HS-FS devices. That is why the load_dmsc.js has been removed. It looks like your device at hand is a GP device, so the load_dmsc_hsfs.js does not work for you. The only option you have to continue to use the AM243x MCU+ SDK 08.06.00.

    Best regards,

    Ming