This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Part Number: TMDSCNCD263


 I am using the SDK mcu_plus_sdk_am263x_08_06_00_34. I try the Example Code uart_echo_dma_am263x-cc_r5fss0-0_nortos_ti-arm-clang I Change Read & Write Transfer Mode to Callback. Then I Write Tx and RX 

in While loop Once once the Interrupt is Triggred and the next time Tx Message also Not Sent.