• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C123GH6PGE: LAUNCHXL-CC2640R2 launch Pad does not detecting

Vasantha Priya S
Prodigy 20 points
Part Number: TM4C123GH6PGE
Other Parts Discussed in Thread: LAUNCHXL-CC2640R2, UNIFLASH

Can we use  LAUNCHXL-CC2640R2 for flashing TM4C123GH6PGE?

  • 0
    TI__Guru**** 182636 points

    Hi,

      I have no experience with LAUNCHXL-CC2640R2. I can only answer questions related to TM4C. The LAUNCHXL-CC2640R2 has a on-board XDS110. If you configure the board to debug out and connect to the JTAG connector on your TM4C123 board then I think it should work. You need to use CCS or Uniflash to program TM4C123. For LaunchXL-CC264R2 specific question as to how to properly configure the board, please open a new thread so the experts there can assist you better. When you open a new thread, use the part number LAUNCHXL-CC2640R2 so the thread will be automatically routed to the support team.