This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC1310: Cannot generate board files in sysconfig

Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: SYSCONFIG, CC1310

Greetings

I am trying to configure a CC1310 Launchpad on Sysconfig. My aim is to set the device up for SPI and UART. I am unable to generate the board.c and board.h files but rather just the .sysconfig file itself and a .csv of the config. See the image attached, where only 2 files are generated. How do I possibly import this into a project, or atleast generate the files in sysconfig?

I have read through some training docs that also state one can open an "empty project" from the SDK examples and configure the .sysconfig file in that project, but that example does not exist for this launchpad. 

Any help would be appreciated.

 

  • Good Lord. This was my mistake. I did not select the CC1310-SDK when selecting the chip prior to the stage of the configuration in the image attached. I can now select peripherals and the board.c and board.h files are being generated in Sysconfig. Apologies.