This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1231E6PZ: The TM4C1231E6PZ board we created no longer generates any interrupts.

Part Number: TM4C1231E6PZ
Other Parts Discussed in Thread: EK-TM4C123GXL, TM4C123GH6PM

The TM4C1231E6PZ board we created no longer generates any interrupts. Occurs only immediately after reset.
Similar software is fine on the LaunchPad EK-TM4C123GXL.

Is this a softwere issue with the CCS settings? Or is it a hardware issue?