This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSHSECDOCK: TMDSHSECDOCK Rev F Info Guide / Missing JTAG Pin 6 Assembly Notes

Other Parts Discussed in Thread: C2000WARE


Some feedback on Info Doc for TMDSHSECDOCK (SPRUIJ6A).

- It only has Figure 3-1 for Rev 5.0. I suggest that you add a photo for Rev F showing additional JTAG and FSI headers.

- The assembly notes ZZ6 and ZZ7 in document: C:\ti\c2000\C2000Ware_5_01_00_00\boards\ExperimenterKits\DockingStation_HSEC_120or180pin\revF\MCU047F(001)_Assy.PDF

The JTAG headers are not useable with the XDS110 (and probably other debuggers) without the end user having to take some cutters to their newly purchased TMDSHSECDOCK. At the very least, if TI won't perform this operation, you need to mention ZZ6 and ZZ7 in an updated version of the Info Doc, perhaps in section 2.3 Using the Docking Station.

Thank you.