TMDSEMU110-U: TMDSEMU110-U Performance problem

yingjiao LI

Part Number: TMDSEMU110-U
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

After we upgraded this product according to the prompt, it cannot be used. Please help confirm the cause
How to solve it
Thank you

7 months ago

0 JD Crutchfield 7 months ago

TI__Mastermind 28745 points

Hello,

It sounds like it prompted you to update the firmware on it, did the seem to be successful? Typically the only issues I've seen were from when it is unplugged mid-update, did that happen?

What happens when you try and program with it? Do you get any errors?

Thanks,

0 yingjiao LI 7 months ago in reply to JD Crutchfield

Expert 1185 points

In the process of our upgrade, the upgrade failed, how to solve this change

0 JD Crutchfield 6 months ago in reply to yingjiao LI

TI__Mastermind 28745 points

Hello,

Does the XDS110 still show up in the computer's device manager? If so, you can try using Uniflash and see it it will detect and update it again.

If not, then there are some emergency steps of opening the case up and trying to reflash the XDS manually. Some details in this thread here and it points you to the XDS support document inside the CCS files: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1210827/tmdscncd263-how-to-recover-xds110-firmware

Hope this helps.

0 yingjiao LI 6 months ago in reply to JD Crutchfield

Expert 1185 points

Attached is the re-upgrade operation according to the above way you provided, please confirm whether the interface is correct

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSEMU110-U: TMDSEMU110-U Performance problem